http://www.hebeidiweikeji.com/molding-machine/plastic-thermoforming-machine/ The Multi station molding machine is an advanced modern equipment which is independently developed and designed by our scientific research personnel to lead the domestic market. The emergence of the machine solves the problems of high labor cost, complicated production process and unqualified product hygiene in the traditional plastic industry. It greatly reduces the production cost of target customers, saves labor input, and makes the traditional plastic industry transition from labor-intensive enterprises to technology intensive enterprises. The scope of application of this machine is diversified, including food, medicine, cosmetics, daily chemical, hardware, stationery and other industries. A wide range of materials, PP, PS.PVC.PET . BOPS.PLA And so on. Product features: 1. Full servo control system, reasonable mechanical structure, convenient operation and maintenance 2. Molding, punching, punching, independent operation, stable performance 3. It adopts 15 inch touch screen control, and the built-in picture is clear and intuitive, 4. In operation, the upper and lower molds are moving, the forming uniformity is good, and the mold closing is fast. It can produce two side protruding products. 5. The height of the upper die is driven up and down by the motor, which makes it more convenient to change the die 6. High quality laser knife is used for punching to reduce the cost of customer's die. At the same time, non breakpoint punching technology is adopted to make the product have no sharp edge 7. Automatic manipulator stacking is adopted, which can stack a large number of special-shaped products and reduce the labor cost of customer packaging. 8. The punching station is equipped with a large waste box to avoid frequent dumping and cleaning The technological process First, the granular or powdery plastic is added into the barrel, and the plastic is melted by the rotation of the screw and the heating of the barrel outer wall. Then, the machine closes the mold and moves the injection seat forward, so that the nozzle is close to the gate of the mold. Then, the injection cylinder is filled with pressure oil to push the screw forward, so that the molten material is injected into the closed mold with low temperature at high pressure and fast speed The purpose of holding pressure is to prevent the reverse flow of molten material in the mold cavity, to supplement materials to the mold cavity, and to ensure that the product has a certain density and dimensional tolerance. Safety operation rules 1. Wear gloves, masks, hats and other labor protection articles before going to work. 2. Before starting the machine, check whether there is any foreign matter in the slideway and the pressing plate of the pressure head. 3. When starting, check whether the motor rotation is normal, and whether the hydraulic and pneumatic parts are normal. 4. Mechanical personnel should be focused and familiar with the operating procedures. It is strictly forbidden to chat, send and receive mobile phones, listen to music and other interference. Don't put your hands on the track of the treadmill. 5. Pay attention to safety. In case of machine failure, stop the machine first and ask special person to repair it. Do not have any trouble during operation. Maintaining a good maintenance system can not only effectively extend the service life of the equipment, but also prevent the occurrence of production accidents. Technical parameters: Applicable materialsPP PET PS PLA Explanation of starch, etcPP PET PS PLA Explanation of starch, etcPP PET PS PLA Explanation of starch, etc Thickness of formed sheet0.2鈥?.0mm0.2鈥?.0mm0.2鈥?.0mm Sheet width鈮?00mm鈮?00mm鈮?00mm work efficiency1-30 mold / min1-30 mold / min1-30 mold / minPlastic Thermoforming Machine in stock website:http://www.hebeidiweikeji.com/molding-machine/plastic-thermoforming-machine/